Filter
Top Products
3. Press
the
F
button to indicate that you wish to change the setting.
The display changes to:
4INTERFRCE
Parallel:
4.
Press the
A
or
V
button to switch the display to Se
r
i a 1.
The display changes
to:
)
4
INTERFIXE
Serial:1
5.
Press
the
4
button.
The display changes to:
:INTERFf%E
Serial,
Note: If you are changing only one option, skip to step 14 at this
point. The other steps show you how to change two other options,
following the same method given for
the INTERFACE
option.
6.
Press
the
V
button to switch the display
to
BAIJD
Rf3TE.
The display changes to:
:BFIUDRflTE
9600BPSb
7.
Press the
F
button.
The display changes to:
4BfOJD
RF1TE
9600BPS:
8.
Press the A or
V
button to set
the
baud rate. In this example, the
baud rate is reset to 2400
BPS.
The display changes to:
4BfiUD
RFITE
2400BPS:
9.
Press the
4
button.
The display changes to:
:EHJD
R~ITE
2400BPSb
10. Press the
V
button to switch the display to
PflRITY.
The display shows:
SPhRITY
None,
Using the Printer
3-21