Filter
Top Products
6.
Press
the
4
button again to exit the font selection process. These
two screens are alternately displayed:
SCIUEMf3CRO
#n:
.
&
4fiBORT
SfV.JEb
7.
Press the
A
or
V
button to select the number of the macro to be
saved. You can
choose
a number from 1 to 4.
8.
Press the
b
button to save the macro.
(If you do not wish to save your changes to a macro, press the
4
button to abort.
When you
abort, the settings you select remain in
effect only until you turn off your printer.
)
If you save
the
macro, the display briefly shows:
MflCRU#nSFIUED
Next, the display changes to:
:CHFINGEMFlCRU
b
You are
now
back at the SelecType main menu.
9.
To switch to another main menu mode, press the
A
or
V
button. If
you wish to exit SelecType mode, press the
SelecType
button.
Whenever you wish to use a macro that you
have
changed and
saved, you can load it using the
LUAD
MACRO
mode. Your changed
macro is saved even when you turn off the printer.
CHANGE DEFAULTS
The defaults are the settings in effect when you turn the printer on. The
following is a list of possible default settings for the LQ-2550.
INTERFRCE
Parallel, Serial
BAUDRflTE*
3G18,
68@,
12QB,
2488,
4888,
968Q,
19288 BPS
*Displayed only when the serial interface setting is selected
3-18
Using the Printer