Filter
Top Products
Vertical Motion
Form feeding
FF
Form Feed
Format:
ASCII code: FF
Decimal:
12
Hexadecimal: 0C
Comments:
Prints the data in the print buffer and advances the paper to the next
top of form according to the current page length. The default page
length is 66 lines, but the page length can be changed with ESC C. In
cut sheet feeder mode, an FF ejects a sheet but does not load one.
ESC C
Set Page Length in Lines
Format:
ASCII code:
ESC C n
Decimal:
27 67 n
Hexadecimal: 1B 43 n
Comments:
Sets the page length to n lines in the current line spacing. The value of
n must be from
1-127.
The top of form position is reset to the current
line. Overrides the SelecType page length setting.
ESC C 0
Set Page Length in Inches
Format:
ASCII code:
ESC C 0 n
Decimal:
27 67 0 n
Hexadecimal: 1B 43 00 n
Comments:
Sets the page length to n inches. The value of n must be from l-22.
The top of form position is reset to the current line. Overrides the
SelecType page length setting.
Command Summary
8-13