Filter
Top Products
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software 97
• Ties as Crosspoints — Displays ties as a matrix of inputs and outputs. Current ties
that have been made are indicated by amber boxes.
• To create a tie, click in a crosspoint box. A + sign appears briefly in the box you
clicked, indicating a tie has been formed.
• To break a tie, click on the desired amber (tied) box. A – sign appears briefly and
the amber fill is cleared from the box.
Figure 97. Ties Shown as Crosspoints
• Signal-detection options — Provides a submenu that allows you to set the input
signal detection (DSVP) feature to do one of the following:
• Automatically refresh the display every 10 seconds.
• Sample the sync and update the display whenever you make a configuration
change (On Demand or by Refresh).
• Never sample and display the sync or no sync status (None).
• Limit ties to same group — Allows you to create ties only between inputs and
outputs that are in the same group (similar to front panel operation).
• Icons in I/O boxes — Displays icons that you place in the I/O boxes in the matrix
window (see figure 96 on the previous page).