Filter
Top Products
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 69
X4$
= Notification selections, part 2 If
X4#
= I, then:
X4$
= 0 (all inputs) or 1 through 8
(input 1 through input 8)
If
X4#
= F, then:
X4$
= 00 (all fans)
If
X4#
= P, then:
X4$
= 00 (both power supplies)
X4%
= Notify when? 0 = no response
1 = fail or missing
2 = fixed or restored
3 = both 1 and 2
4 = suspend
X4^
= DHCP 0 = off, 1 = on
X4&
= Port number 01 through 99 (two ASCII characters)
X4*
= Baud rate 9600, 19200, 38400, 115200 (default = 9600)
X4(
= Parity odd, even, none, mark, space (Only the first letter is
required. Default = none.)
X5)
= Data bits 7, 8 (default = 8)
X5!
= Stop bits 1, 2 (default = 1)
X5@
= Port type 0 = RS-232
1 = RS-422
X5#
= Verbose mode 0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232 or RS-422
connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
NOTE: If tagged responses is enabled (modes 2 and 3), all read commands return the
constant string and the value as the set command does (for example, the read matrix
name command
E
CN
}
, returns Ipn•
X3)]
).
X5$
= Port timeout interval 1 (= 10 seconds) through 65000
(in 10 second increments) (Default is 30 = 300 seconds = 5
minutes)
X5%
= Time (in 10 ms increments) to wait 10 (= 100 ms, default) through 32767
for characters
X5^
= Time (in 10 ms increments) to wait 2 (= 20 ms, default) through 32767
between characters