Filter
Top Products
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software 73
Software Operation Via Ethernet
When a DXP switcher is connected to a network, any number of users can operate
it, locally or remotely, using the Matrix Switcher Control Program (see “Ethernet
Connection” on page 10 for connection details).
Connection to the switcher via Ethernet can be password protected. There are two levels
of password protection: administrator and user. Administrators have full access to all
DXP switching capabilities and editing functions. You can select inputs and outputs, set
and recall presets, and view all settings with the exception of passwords. If the same
password or no password is required for logging on, all personnel are logged on with
administrator privileges. Fields and functions that exceed user privileges are grayed out in
the control program when the operator is logged on as a user.
Ethernet protocol settings
The IP Settings/Options screen (shown on page 79) provides a location for viewing
and, if connected via the RS-232 or RS-422 link or if you are logged on via the Ethernet
port as an administrator, editing settings unique to the Ethernet interface (see “IP Setup”
on page 79 for more details).
Special Characters
The HTML language reserves certain characters for specific functions. The switcher
does not accept these characters in preset names, the switcher name, passwords, or
locally created file names. Use of the following characters is not recommended: {space}
(spaces can be used in names) + ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ and ?.
Using the Software
Many items in the Matrix Switcher Control Program are also accessible via front panel
controls (see the “Operation” section, beginning on page 12); under SIS control (see
the “SIS Configuration and Control” section, beginning on page 49); and via the web
pages (see the “HTML Operation” section, beginning on page 105). The Matrix Switcher
Control Program help file provides information on settings and using the program.
1. To run the Matrix Switcher Control Program, click on the Matrix
Switcher
+ Control Pgm icon (shown at right) in the Extron
Electronics group or folder on the Start menu. You can access this
icon by selecting Start > All Programs > Extron Electronics >
Matrix Switchers >
Matrix Switcher + Control Program.
The Comm Port Selection window opens.
Figure 71. Comm Port Selection Window