Filter
Top Products
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Introduction 2
DXP HDMI Series:
• DXP 44 HDMI: 4 inputs by 4 outputs
• DXP 48 HDMI: 4 inputs by 8 outputs
• DXP 84 HDMI: 8 inputs by 4 outputs
• DXP 88 HDMI: 8 inputs by 8 outputs
All three series provide easy integration in applications that require reliable DVI, DVI Pro,
or HDMI signal routing. They include several convenience features that are common to
most Extron matrix switchers, such as the QuickSwitch Front Panel Controller (QS-FPC
™
),
global presets, IP Link
®
, and Ethernet control.
All models feature automatic cable equalization for all inputs and automatic re-clocking for
each output. These features reduce the need for additional signal conditioning equipment
by compensating for weak source signals or signal loss when you are using long input
cable assemblies.
The DXP matrix switchers can be operated via the front panel, RS-232 and RS-422 serial
control, and IP Link Ethernet control. Optional Extron X-Y remote control panels are also
available to operate the DXP switcher remotely.
Features
DXP DVI and DXP DVI Pro Series
• Inputs and outputs on DVI-I connectors
• HDMI signal support — Full support of embedded HDMI audio signals when
optional Extron HDMI-to-DVI adapters are used. Audio carried in the HDMI stream is
switched with the video but not removed or decoded from the data stream.
• Automatic cable equalization for each input to 100 feet (30.4 m) at 1920x1200
when the DXP is used with Extron DVI cables
DXP HDMI Series
• Inputs and outputs on HDMI connectors
• DVI signal support — Full support of DVI signals when optional Extron DVI-to-HDMI
adapters are used. Audio carried in the DVI stream is switched with the video but not
removed or decoded from the data stream.
• Automatic cable equalization for each input to 100 feet (30.4 m) at 1920x1200
when the DXP is used with Extron HDMI cables
DXP DVI, DXP DVI Pro, and DXP HDMI
All DXP series feature the following:
• Automatic output re-clocking — Automatic output re-clocking stabilizes data to
correct pair skew and restore signal integrity for improved performance. Signals are
reshaped and the timing is restored to allow for transmission over long cables.
• Power for external devices — +5 VDC, 250 mA power is available on the outputs
for external peripheral devices.