Extron electronic DXP DVI Switch User Manual


 
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Reference Information 123123
Optional Accessories
The following optional accessories can be purchased for use with the DXP DVI,
DXP DVI Pro, or DXP HDMI.
Accessory Part Number
MKP 2000 Matrix Switcher X-Y Remote Control Panel (black) 60-682-02
MKP 3000 Matrix Switcher X-Y Remote Control Panel (black) 60-708-02
9-pin D female to 2.5 mm TRS configuration cable 70-335-01
Cables and Adapters
The following optional cables and adapters are available for use with the DXP DVI,
DXP DVI Pro, or DXP HDMI Pro:
Cable Part Number
HDMI Pro/3 High Speed male-to-male 3' (90 cm) 26-650-03
HDMI Pro/6 High Speed male-to-male 6' (1.8 m) 26-650-06
HDMI Pro/12 High Speed male-to-male 12' (3.6 m) 26-650-12
HDMI Pro/25 Standard Speed male-to-male 25' (7.6 m) 26-650-25
HDMI Pro/35 Standard Speed male-to-male 32' (10.6 m) 26-650-35
HDMI Pro/50 Standard Speed male-to-male 50' (15.2 m) 26-650-50
HDMI Pro/75 75’ (22.8 m) Standard Speed 26-650-75
HDMI Pro/100 100’ (30.4 m) Standard Speed 26-650-100
HDMI Pro/125 125’ (38 m) Standard Speed 26-650-125
HDMI Pro/150 150’ (45.7 m) Standard Speed 26-650-150
HDMI Pro/175 175’ (53.2 m) Standard Speed 26-650-175
HDMI Pro/200 200’ (60.9 m) Standard Speed 26-650-200
HDMIM-DVIDF HDMI male-to-DVI-D female adapter 26-617-01
HDMIF-DVIDM HDMI female-to-DVI-D male adapter 26-616-01
HDMIF-DVIDF HDMI female-to-DVI-D female adapter 26-618-01
Mounting the Switcher
UL Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
DXP into a rack:
Elevated operating ambient temperature — If the equipment is installed in a
closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient. Therefore, consider installing the
equipment in an environment compatible with the maximum ambient temperature
(Tma) specified by Extron.
Reduced air flow — Install the equipment in the rack so that the amount of air flow
required for safe operation of the equipment is not compromised.