Filter
Top Products
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 54
SIS Commands for DXP
Symbol Definitions for DXP
]
= Carriage return and line feed
}
or
¦
= Carriage return (no line feed)
• = Space
E
or W = <Escape> key
NOTE: Input and output numbers in commands may be entered as either one-digit, two-
digit, or three-digit numbers. All input and output numbers are reported as two-digit
numbers in the response.
X!
= Input number 1 – maximum number of inputs for your model
X@
= Input number (for ties)
0 – maximum number of inputs for your model
(0 = untied)
X#
= Output number 1 – maximum number of outputs for your model
X$
= Lock mode, power, 0 = lock mode 0, not OK, or unmuted
supply or individual 1 = lock mode 1, OK, or muted
mute status 2 = lock mode 2
X%
= Group number (for I/O 1 through 4 groups
grouping) 0 = no group
X^
= Room number (for room 10 maximum. Each room can have up to 10 room
presets) presets (X*) assigned.
NOTE: A room is a subset of operator-selected outputs that relate to each other. The DXP
switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.
X&
= Global preset number 00 – 32 (00 = current configuration)
X*
= Room preset number 00 – current ties for the room in view mode, 10
maximum
NOTE: A room preset is a stored configuration with all of the outputs assigned to a single
room. When a room preset is retrieved from memory, it becomes the current
configuration.
X(
= All video and audio mute 0 = no signals muted
status 1 = video muted
2 = audio muted
3 = video and audio muted
X1)
= HDCP status 0 = No input or output is connected.
1 = Input or output is connected and is not HDCP
compliant.
2 = Input or output is connected and is HDCP
compliant.
X1!
= Connection status 0 = no input connected
1 = input connected
X1#
= Name 12 characters maximum for input, output, and global
preset names
11 characters maximum for room names
Upper- and lowercase letters are valid.
NOTE: The following characters are invalid or not recommended in the name:
{space} ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ + and ?
X1$
= Total inputs Total number of inputs for this switcher
X1%
= Total outputs Total number of outputs for this switcher