Filter
Top Products
GSS 100 Graphic Still Store • Operation
Operation, cont’d
GSS 100 Graphic Still Store • Operation
3-6
3-7
Adjust/Select knob — When in a submenu, rotate the
Adjust/Select knob to scroll through the submenu options
and select a setting. See the flowcharts in this chapter and
specific sections for explanations of knob adjustments.
N
To return to the default screens, let the GSS remain idle
for 10 seconds until the selected screen times out, or
press the Menu button until the Exit Menu appears,
then press the Next button.
N
From any menu or submenu, after 10 seconds of
inactivity, the GSS saves all adjustment settings and
times out to the default LCD display cycle.
The GSS saves settings to its non-volatile memory
every three minutes. Ensure that you wait at least three
minutes after making any changes or those changes may
be lost.
Switch Effect menu
Figure 3-7 is a flowchart that shows an overview of the Switch
Effect menu and the available settings.
Menu Menu 10 sec. 10 sec.
Power
on
Menu
Default
Cycle
Next
Switch
Effect
Next Next
Menu
Menu
Menu
Menu
Menu
10
sec.
10
sec.
Output
Config
Slide
Show
Advanced
Menu
Exit
Menu
10
sec.
10
sec.
10
sec.
Effect
Cut
Duration
0.0 Secs
Output transition
• Cut • Dissolve
Dissolve duration
0.0 to 5.0 seconds in
0.1 second increments.
Figure 3-7 — Switch Effect menu flowchart
Effect submenu
Rotate the Adjust/Select knob while in the Effect submenu to
cut (immediate switch) and dissolve (the image dissolves from
old to new). Cut is the default selection.
Duration submenu
Rotate the Adjust/Select knob while in the Duration submenu
to select the duration for the dissolve effect (if it is selected),
between 0.0 and 5.0 seconds in 0.1 second increments. The
default duration is 1.0 seconds.
Output Configuration menu
Figure 3-8 is a flowchart that shows an overview of the Output
Configuration menu and the available settings.
N
The Output Configuration menu settings apply only
to the output of still images stored in the GSS; the
RGB Pass-through video is output exactly as it is input.
Resolution submenu
Rotate the Adjust/Select knob while in the Resolution submenu
to select the resolution of the stored image output. 1024 x 768 at
60 Hz is the default resolution.
N
To view an uncropped full screen image at 1080p or
1080i, the image resolution must be 1440 x 1080.
10 sec. 10 sec.
Power
on
Menu
Default
Cycle
Next
Next
Next
Menu
Menu
Menu
Menu
Menu
10
sec.
10
sec.
Output
Config
Slide
Show
Advanced
Menu
Exit
Menu
10
sec.
10
sec.
10
sec.
1024 x
768 @60
Sync
RGBHV
Next
Output sync format
• RGBHV • RGBS
Resolution
See the table
on page 3-8.
Switch
Effect
10 sec. 10 sec.
Cut duration
0.0 to 5.0 seconds in
0.1 second increments.
Sync polarity
• H-/V- • H+/V-
• H-/V+ • H+/V+
Next
Menu Menu
Menu Menu
RGB Dly
0.0 Sec
H Pol V
Neg Neg
Figure 3-8 — Output Configuration submenu