Filter
Top Products
GSS 100 Graphic Still Store • SIS
™
Control
SIS
™
Control, cont’d
GSS 100 Graphic Still Store • SIS
™
Control
4-14
4-15
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional description
File management
N
A directory name is an alphanumeric text string that can also include the minus (-), plus (+), and colon (:) signs. Blank and space characters
are not permitted. The first character must be a letter. The directory name is not case-sensitive.
Change or create directory
E
path/directory/CJ
}
Dir•path/directory/
]
Go to root directory
E
/CJ
}
Dir•/]
Go up one directory
E
..CJ
}
Dir•path/directory/
]
Show current directory
E
CJ
}
path/directory/
]
N
The response to the List Files commands (
E
DF and
E
LF) differ, depending on whether the command is sent via an RS-232/RS-422 or
Telnet connection or sent via a Web browser connection.
List the files in the current
directory
RS-232/RS-422 port
and Telnet
E
DF} filename1,date/time,length
]
filename2,date/time,length
]
• •
• •
filenamen,date/time,length
]
space_remaining Bytes•Left
]]
List the files in the current
directory
Web browser
E
DF}
ar file = new array (); List user-supplied files.
File [1] = ‘filename1,date1,filesize1’
File [2] = ‘filename2,date2,filesize2’;
• •
• •
File[n] = ‘filenamen,daten,filesizen’
File[n+1] = space_remaining Bytes•Left
List selected files from
current directory
EX/
DF
}
EX/X/
DF
}
Same response
Same response
X/
is the the first character of the file extension.
X/X/
is the first character of the filename and the first
character of the extension.
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional description
File management (continued)
List the files from the
current directory and
below
E
LF
}
Same response
List selected files from
current directory and
below
EX/
LF
}
EX/X/
LF
}
Same response
Same response
X/
is the the first character of the file extension.
X/X/
is the first character of the filename and the first
character of the extension.
Erase user-supplied Web
pages and files
E
filenameEF} Delfilename
]
Erase current directory and
its files
E
/EF
}
Ddl
]
Erase current directory and
subdirectories
E
//EF
}
Ddl
]
Port configuration
Configure port parameters
EX2)*X2!,X2@,X2#,X2$CP
}
Cpn01•Ccp9600,N,8,1
]
Example:
E
01*9600,N,8,1CP} Cpn01•Ccp9600,N,8,1
]
Set the the RS-232 port to 9600 baud, no parity, 8 data
bits, and 1 stop bit.
N
The port variable (
X2)
) is always 01.
View port parameters
EX2)
CP}
X2!,X2@,X2#,X2$
]
Set RS-232 port timeout
E
0*
X2%
TC} Pti0*X2%
]
View RS-232 port timeout
E
0TC} X2%
]
Set global IP timeout
E
1*
X2%
TC} Pti0*X2%
]
View global IP timeout
E
1TC} X2%
]
Command/response table for SIS commands (continued)
Command/response table for SIS commands (continued)