Filter
Top Products
HTML Control and IPL File Manager, cont’d
GSS 100 Graphic Still Store • HTML Control and IPL File Manager
GSS 100 Graphic Still Store • HTML Control and IPL File Manager
5-165-16
5-175-17
N
Valid firmware files must have the file extension “.S19”.
Any other file extension is not a firmware upgrade file.
N
The original factory-installed firmware is permanently
available on the GSS. If the attempted firmware upload
fails for any reason, the GSS automatically reverts to the
factory-installed firmware.
10. Click the Open button.
11. Click the Upload button. The firmware upload to the
GSS may take a few minutes. The GSS’s LCD display
shows Firmware Upload, then Re-Starting. When the
LCD returns to the default display cycle (see Power-on
indications, in chapter 3, Operation), the firmware upload is
complete.
File Management Page
To delete files such as HTML pages from the GSS or to upload
your own files to the GSS, click the File Management tab. The
GSS outputs the File Management HTML page (figure 5-11).
Figure 5-11 — File Management page
N
The files listed in figure 5-11 are shown for example only
and may not be present on your GSS 100.
To delete a file, click the individual Delete button to the right of
the file that is no longer needed.
Upload your own files as follows:
1. Click the Browse button. The Choose File window appears.
2. Browse through your system and select the desired file.
N
The following characters are invalid in file names:
{space} + ~ @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
N
If you want one of the pages that you create and
upload to be the default startup page, name that file
“index.html”.
3. Click the Upload File button. The file that you selected
appears in the list.
Control Page
Click the Control tab to access the Control page (figure 5-12).
Figure 5-12 — Control page
On the Control page, you can set the transition effect (cut or
dissolve), mute and unmute the video, and select the dissolve
duration (from 0 to 5 seconds, in 0.1-second increments). You
can also change the slide show settings, such as:
• The duration of each image displayed in the slide show
(from 0 to 300 seconds)
• Inclusion of the pass-through input in the slide show
• Auto Switch mode