Filter
Top Products
GSS 100 Graphic Still Store • SIS
™
Control
SIS
™
Control, cont’d
GSS 100 Graphic Still Store • SIS
™
Control
4-12
4-13
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional description
View, information, part number, and firmware requests
Information request I
Chn
X@
•Vmt
X@
•Exe
X@
•Typ
X(
]
Example:
I
Chn0•Vmt0•Exe1•Typ0
]
Pass-through input is not displayed, video output is not
muted, panel is locked, no pass-through sync signal is
detected.
Request user memory usage 4I
X1)
•Bytes•Used•out•of•17344•KBytes
]
Example:
4I
1149184•Bytes•Used•out•of•17344•KBytes
]
This device has approximately 5850 kBytes of user
memory available (17344 kBytes - 11491 kBytes) for
additional stored images and locally-created HTML
pages.
Request for part number N
60-684-01
]
Display GSS 100 part number.
Query firmwre vesion Q
X1!
]
Firmware version x.xx.
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional description
Reset
Erase all files
E
Zfff
}
Zpf
]
Reset flash memory (erase user-supplied files). This reset
does not reset IP settings.
Master reset
E
Zxxx
}
Zpx
]
Resets all user settings to their default values. This reset
does not reset IP settings or delete loaded image files.
Absolute reset
E
Zqqq
}
Zpq
]
Resets all device settings to their factory defaults. Erases
all loaded files. The firmware version remains unchanged.
Absolute reset retaining IP
E
ZY
}
Zpy
]
Similar to absolute reset (
E
Zqqq), except that IP
settings; including the IP address, subnet mask, gateway
address, unit name, DHCP setting, and port mapping
(Telnet/Web/Direct Access) are excluded. This preserves
communications with the device and is recommended
after a firmware update..
Command/response table for SIS commands (continued)
Command/response table for SIS commands (continued)