Filter
Top Products
GSS 100 Graphic Still Store • Quick Start Guide
QS-3
Install and operate the GSS 100 Graphic Still Store as follows:
Step 1
Turn all of the equipment off or disconnect it from the power source.
Step 2
Mount the GSS in a rack or furniture, or place it on a desktop.
Step 3
Connect video output
cables for RGBHV or
RGBS video.
If desired, connect a
pass-through RGBHV or
RGBS video input.
Step 4
Connect an RJ-45 cable between the GSS’s LAN port and a computer
or a computer network.
Step 5
If desired, connect the GSS to a control system or control computer
via the GSS’s RS-232 port.
Step 6
Apply power to the GSS and the computer and/or computer
network.
Step 7
Use the embedded GSS web pages to load *.bmp and/or *.jpg
image(s) into the GSS. See chapter 5, HTML Control and IPL File
Manager.
Step 8
Select a stored image to display as follows:
a. Press the front panel Image button.
b. Rotate the front panel Adjust/Select knob until the file name of
the desired stored image is shown in the LCD display.
c. Press the front panel Take button.
Quick Start Guide — GSS 100
RGBHV
R
RGBS
G B H/HV V
R G B H/HV V
QS-1