Extron electronic System 7SC Switch User Manual


 
4-5System 7SC • Serial Communication
Video configuration
Set video signal type
X5
*
X4
\ Typ
X4
= ____ Set the input signal type. (Type =
Vid, Y-C, YUV, YUVp, or RGB)
Example: 2*7\ Typ7=YUVp Example: set input 2 to
progressive component video
View the video signal type
X5
\
X4
Show the video signal type.
Example: 6\ Typ1=Vid Example: show input 6 video type.
Color
Set a specific color value
X10
C Col
X10
Specify a color adjustment level.
Example: 47C Col047 Example: set the color adjustment to 47.
Increment +C Col
X10
Increase color adjustment level.
Decrement -C Col
X10
Decrease color adjustment level.
View the color value C Col
X10
Show the color adjustment.
Tint
Set a specific tint value
X10
T Tin
X10
Specify a tint adjustment level.
Example: 176T Tin176 Example: set the tint to 176.
Increment +T Tin
X10
Increase tint adjustment level.
Decrement -T Tin
X10
Decrease tint adjustment level.
View the tint value T Tin
X10
Show the tint adjustment.
Contrast
Set a specific contrast value
X10
^ Con
X10
Specify the contrast adjustment.
Increment +^ Con
X10
Increase the contrast.
Decrement -^ Con
X10
Decrease the contrast.
View the contrast value ^ Con
X10
Show the contrast setting.
Brightness
Set a specific value
X10
Y Brt
X10
Specify the brightness
adjustment.
Increment +Y Brt
X10
Increase the brightness.
Decrement -Y Brt
X10
Decrease the brightness.
View the brightness value Y Brt
X10
Show the brightness setting.
Detail mode
Set the detail level
X13
D Det
X13
Specify the detail level.
View the detail value D Det
X13
Show the detail setting.
Horizontal shift
Set horizontal position
X10
H Hph
X10
Specify the horizontal position.
Increment +H Hph
X10
Shift right.
Decrement -H Hph
X10
Shift left.
View the horizontal pos. value H Hph
X10
Show the horizontal position.
Vertical shift
Set the vertical position
X10
/ Vph
X10
Specify the vertical position.
Increment up +/ Vph
X10
Shift up.
Increment down -/ Vph
X10
Shift down.
View the vertical pos. value / Vph
X10
Show the vertical position.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)