Filter
Top Products
Operating manual
CNC 8070
EDITING-SIMULATION MODE
Graphics window
6.
(SOFT V03.0X)
113
Softkey menus of the graphics window
When selecting the graphic window, the horizontal softkey menu shows the options
associated with that window. The set of options offered by this menu may be changed
using the "+" softkey which offers a new set of options.
The options available in the softkey menu are the following. See "6.5 Graphic
window (softkeys)" on page 117.
"Type of graphics"
To select the type of graphics.
"ZOOM"
To enlarge or reduce the whole graph shown or part of it.
"Dimensions"
To define the size of the graphic representation.
"Point of view"
To change the point of view of the graph and show it from another perspective.
"Measurement"
To measure the distance between two points.
"Clear screen"
It is used to clear the screen or delete the graphics displayed.
"Colors"
To set the appearance of the graphics on display.
"Options"
To set the appearance and some options of the graphic window.
"Speed"
To change the simulation speed.