Filter
Top Products
Operation manual
8070 CNC
11.
PLC
Program editing (softkeys)
(SOFT V03.0X)
228
11.4.6 Customizing
It is used for personalizing the appearance and properties of the editing window.
Customizing "Appearance" (looks)
It is used for personalizing the look of the different elements of the editing window
and the colors of the elements of the program.
When selecting this option, the CNC shows the dialog box with two panels. The first
one has the elements of the editing window that may be customized and the second
one those of the program. The panel is selected by the key combination
[CTRL]+[TAB].
After defining the new look, use the cursor to select one of the buttons here below
to accept or ignore the changes made and press [ENTER].
The dialog box may also be closed directly without accepting the changes by pressing
[ESC].
Customizing "Save always" & "Not always"
It is used to save the program automatically or manually.
• When "auto-save" is on, the CNC will automatically save the program after every
change.
• When "manual save" is active, the user must save the program (as explained in
the "11.4.2 File" section of this chapter).
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.
(A) To accept the changes and close the dialog box.
(B) To ignore the changes and close the dialog box.
(C)To apply the changes and close the dialog box.
Set aspect
To move the cursor through the elements of the list.
To select an option of a group (A).
To turn on/off the checkboxes (C), and to open/close the drop lists
(B).
A
B
C
B
A CB