Filter
Top Products
Operating manual
CNC 8070
6.
EDITING-SIMULATION MODE
Profile editor
(SOFT V03.0X)
142
Definition of a curved section (clockwise or counterclockwise)
To define a curved section, the softkey menu shows the necessary options to define
the data for the section.
X Y To define the section's end point.
Center X To define the arc's center coordinate along the abscissa axis.
Center Y To define the arc's center coordinate along the ordinate axis.
Radius To define the arc radius.
Tangency To define whether the section is tangent to the previous path.
Validate To accept and draw the defined section.
The data is defined in the data area of the screen where the following information is
shown:
X1, Y1 Coordinates of the section's starting point. They cannot be modified because they
belong to the endpoint of the previous section.
X2, Y2 Coordinates of the section's endpoint.
Xc Coordinates of the section's center along the abscissa axis.
Yc Coordinates of the section's center along the ordinate axis.
RADIUS Radius of the arc.
TANGENCY It indicates whether or not the section is tangent to the previous path.