Filter
Top Products
Operating manual
CNC 8070
AUTOMATIC MODE
Program selection and execution
3.
(SOFT V03.0X)
57
3.6 Program selection and execution
3.6.1 Program selection
A different program may be selected and executed in each channel. The program is
executed in the channel where it is selected from.
Once a program has been selected, its name appears on the general status bar. For
each channel, it shows the name of the program selected in that channel.
To select a program, press the icon "Select program" of the softkey menu and the CNC
will show a list of all the programs available. See "2.5 File selection window" on
page 22.