Filter
Top Products
Operation manual
8070 CNC
11.
PLC
Appearance of the PLC mode
(SOFT V03.0X)
218
11.1 Appearance of the PLC mode
When this operating mode is active, it will be indicated at the top right side of the
general status bar.
This operating mode may be displayed with several screens. Each of them
corresponds to a PLC service. The exchange between the different services is carried
out with the list of services.
Standard configuration
The standard configuration of this work mode, described in this manual corresponds
to the one supplied by Fagor. In some cases, the manual shows a sample screen,
instead of that of the CNC in order to make it easier to understand.
The different services overlap each other. If several services active, it is possible to
switch from one to another using the relevant key, if it has been set accordingly. The
services are switched in a rotary manner, in such a way that when pressing on the
last active service, it shows the first one.