Filter
Top Products
Operation manual
8070 CNC
PLC
Appearance of the PLC mode
11.
(SOFT V03.0X)
219
11.1.1 Screen description
The PLC mode screen shows the following information.
A. Service window.
It shows a list of the services available in the PLC environment.
B. Data window.
C. It shows the PLC status, running or stopped.
D. CNC messages.
Softkey menu
When selecting the PLC mode, the horizontal softkey menu will show the options
associated with the PLC service currently selected. The set of options offered by this
menu may be changed using the "+" softkey which offers a new set of options.
A B
C D
It shows the screen associated with the selected service, if any. The screens of
the different services overlap each other. If several services active, it is possible
to switch from one to another using the change key, if it has been set accordingly.
To close a screen, press [ESC].
To switch windows, press the relevant key.
Keys for selecting a service
To close and open the file list of a service.
To move the cursor thru the services of the window.
To move the cursor to the beginning or end of the list.
To acces the service selected with the cursor.