Filter
Top Products
Operating manual
CNC 8070
TOOL AND MAGAZINE TABLE
Magazine table
9.
(SOFT V03.0X)
193
9.6 Magazine table
Up to four different magazines may be configured. Each magazine has a table
showing the tool distribution in the magazine and which table is in the spindle and
on each holder of the changer arm (if any).
The CNC updates the table data every time a tool is changed.
The table is divided in two panels.
The left panel shows the list of magazine positions. For each position, it indicates
whether it is free, disabled or has a tool. For each tool, it shows the remaining life time
(when using tool life monitoring) and the family it belongs to.
The right panel is informative only; it cannot be selected. This panel shows
information about the magazine status, about the tools in the tool changer arm and
about the tool selected on the list. Optionally, it may show information on the type and
configuration of the magazine.
(A) Magazine positions.
(B) Magazine information.
A
B