Filter
Top Products
Operating manual
CNC 8070
14.
DDSSETUP
Command bar
(SOFT V03.0X)
302
14.3 Command bar
The command bar is available in various services of the DDSSetup mode. From the
command bar, it is possible to execute different commands of the drive, check
variables and modify their value is they may be written.
Executing commands of the drive
The drop list offers the following commands. To execute one of them, select it from
the list and press [ENTER].
• Resetting errors.
• Setting the encoder simulator reference mark (I0).
• Transferring parameters from RAM to Flash.
• Autophasing.
• Validating.
• Calculating friction and inertia.
• Auto-calibration of the HomeSwitch .
• Soft Reset.
• Saving parameters at the encoder.
Consulting and modifying drive variables
Read-only variables may be consulted (those with the "R" indicator on the attributes
column). Read-write variables may be consulted and/or edited (those with the "RW"
indicator on the attributes column). See "14.5 –Parameters and variables–
service." on page 305.
If a variable has been written, pressing [ENTER] reads its value. If a value is assigned
to a variable, when pressing [ENTER], it assumes the new value.
The command bar may be selected with the window changing key, same as the rest
of the screen elements or using its associated softkey.