Filter
Top Products
Operation manual
8070 CNC
11.
PLC
Program monitoring (softkeys)
(SOFT V03.0X)
230
11.6 Program monitoring (softkeys)
When selecting the "Monitoring" option of the softkey menu, the following options will
appear.
Monitoring "Size +"
Every time this softkey is pressed, the size of the text will increase.
Monitoring "Size -"
Every time this softkey is pressed, the size of the text will decrease.
Monitoring "Bold"
When selecting this option, the text of the program appears in bold.
Monitoring "OFF/ON"
It interrupts and resumes program monitoring. While monitoring is interrupted, the
resource status changes are not updated.
Interrupting the monitoring does not stop the execution of the PLC.
Monitoring "Find"
To find text in a program.
When selecting this option, the CNC shows a dialog box requesting the text to be
found. Key in the text and press [ENTER] to begin the search.
As the text is being searched, the cursor will position on the match found. To end the
search, press [ESC].
Monitoring "Customize"
It is used to personalize certain functions of the monitoring window. When selecting
this option, the CNC shows a dialog box with the options available for customizing.
Find
To search for the next program (in descending order).
To search for the previous program (in ascending order).
To end the search and close the dialog box.