Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
129
Resolving the poor Image Quality problems
Symptom: The photos on the cards look pixilated or grainy, as shown below.
Step Procedure
1 Use a high-resolution, 24-bit color image to always capture an image:
at a 24-bit color setting
at 300 dpi
at the same size that it will be printed on the card, (as captured either with a
scanner or with a digital camera)
Caution: If a small or low-resolution image is stretched or blown up, a
pixilated or grainy effect will occur when printing, as shown below.
Good Bad