Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
40
Printer Components: LCD and Softkey Control Pad (continued)
Component Description
The Cancel
button
Use this button to cancel print jobs and reset the Printer for the next print
job.
This Cancel function will cancel all print jobs in the Printer and will
completely reset the Printer. In this case, be sure to cancel the print
jobs from the PC before pressing YES.
Caution: To avoid this, select the Print in Single Card Mode
option from the Printer driver before sending the next print job. If a card is
left within the Printer after a print job is canceled, it will automatically be
ejected.
Pause button Use this button to pause the Printer at any time during operation. (Note:
The Printer will always finish its current task before pausing. When the
Printer is paused, the LED light will flash and the Pause softkey button
will change to Resume.)
Press Resume to continue Printer operation.
Continued on the next page