Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
29
Technical Specifications (continued)
Term Description
Print Speed –
Batch Mode
DTC510/515: 7 seconds per card/514 cards per hour (K)*
DTC510/515: 12 seconds per card/300 cards per hour (BO)*
DTC510/515: 27 seconds per card/133 cards per hour
(YMCKO)*
DTC520/525: 35 seconds per card/102 cards per hour
(YMCKOK)*
DTC515-LC/525-LC: 30 seconds per card/133 cards per hour
(YMCK/lamination)*
DTC525-LC: 36 seconds per card /102 cards per hour
(YMCKK/lamination)*
*Indicates the print Ribbon type and the number of Ribbon panels
printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black,
B=Dye-Sublimation Black and O=Overlay.
Print speeds do not include the time needed for the PC to process
the image.
Process time is dependent on the size of the file, the CPU,
amount of RAM and the amount of available resources at the time
of the print.
Print speed indicates an approximate batch print speed and is
measured from the time a card feeds into the Printer to the time it
ejects from the Printer. (Note: The single card print speeds will
be slower than the batch print speeds listed above since batch
print speed is enhanced by the Printer's multi-tasking capabilities
when printing multiple cards in succession.)
Printing Method Dye-Sublimation/Resin Thermal Transfer.
Overlaminate
Options (for LC)
Thermal Transfer Overlaminate, .25 mil thick
PolyGuard Overlaminate, 1.0 mil and .6 mil thick
All overlaminates available in clear, holographic globe design or
custom holographic design
Continued on the next page