Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
5-35
Troubleshooting with the Printer Error Message Table (continued)
Printer Error
Message
Cause Solution
Print Film Out The Print Film installed in
the printer is empty.
Install new Film and press the
Resume button to continue printing.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Print Film is not
Installed
No Print Film is installed in
the Printer.
Install the Film and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Print Film Sensor
Error
The Printer cannot find
the next panel on the Print
Film.
Check that the Print Film is installed
properly and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Wrong Print Film
Installed
An incorrect Print Film has
been installed, or a driver
setting is incorrect.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.