Filter
Top Products
Section 4: Ribbons and Cards 25
Pro-L Card Printer Users Manual
1. Remove a stack of 100 or fewer cards from the card packaging. Do not touch
the area of the card where you intend to print. Oil or dirt from your hands can
impair print quality.
2. Open the Card Hopper Door located on the right-hand side of the printers
exterior by grasping the top of the door and pulling down. Allow the door to
swing completely open.
3. Insert the stack of cards into the printer by depressing the spring loaded Card
Input Tray and placing the cards between the Card Input Guides (see Section 8
for further Card Input Guide information). Always load cards with the top or
primary print side facing up. If inserting cards with a magnetic stripe, be sure
that the magnetic stripe is positioned downward and that the stripe is oriented
toward the rear of the printer. If inserting smart cards or cards with a pre-
punched slot, be sure the smart card chip is positioned upward and that the
chip or slotted end of the card is inserted first.
Card Hopper Door
Card Input Tray
Card Input Guides
Card Input Tray
proL.qxd 8/6/2000 3:30 PM Page 25