Filter
Top Products
32 Section 6: Using Your Card Printer
Pro-L Card Printer Users Manual
NOTE:
The extra port shown in the previous illustration is an Auxiliary Port (subminiature-D
connector) included and used only on units equipped with an optional smart card contact
station. If your unit is equipped with a contact station and you have questions regarding its
use, please contact your authorized reseller.
2. Connect the other side to the back of your PC at the PARALLEL connector.
The printer must have its Ready LED light illuminated to receive data. If the light is
not ON, press the Pause/Resume button.
B. INSTALLING THE WINDOWS PRINTER DRIVER
Your card printer can be used with virtually any Microsoft Windows 3.1x,
Windows 95/98, Windows NT 4.0, or Windows 2000 software application program.
This is accomplished through what is called a "printer driver." The printer driver is
simply software which gives the printer all the information needed for printing.
The printer driver software is located on the Software Installation CD included
with your printer. If you are reading this on your computer screen from the Online
User's Guide, you have already installed the printer driver and this guide using
this CD. If you would like to provide others with these instructions, however, the
following describes how to install the printer driver for the first time. The latter
part of this section also describes how to install printer driver updates.
proL.qxd 8/6/2000 3:30 PM Page 32