Filter
Top Products
102 U41243-J-Z156-1-76
Boards in hot-plug PCI slot System expansions
Ê Start the PCI hot-plug utility from the Control Panel.
Ê Select the board you want to swap.
Ê Select the Remove function.
Ê Wait until the message Remove the adapter then click OK is displayed.
The power LED (green) must be dark and the warning LED (yellow) must be
blinking.
Ê Remove the hot-plug PCI cover (see the section “Removing/mounting the
PCI bus hot-plug cover” on page 87).
Ê Remove any cables connected to the board.
Figure 27: Removing the PCI board
Ê Release the PCI locking mechanism and remove the board.
Ê Confirm the message Remove the adapter then click OK with OK.