Filter
Top Products
U41243-J-Z156-1-76 75
7 Troubleshooting and tips
V CAUTION!
Observe the safety information in the manual “Safety, Warranty and
Ergonomics” and in the chapter “Installing the server” on page 19 and the
chapter “System expansions” when connecting or disconnecting cables.
If a fault occurs, try to correct it as described
– in this chapter,
– in the documentation for the connected devices,
– in the help system of the individual programs.
If you fail to correct the problem, proceed as follows:
Ê Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
Ê Switch off the server.
Ê Contact your customer service.
7.1 Power-on indicator remains dark
The power-on indicator remains dark after you have switched on your device:
Power cable incorrectly connected
Ê Make sure that the power cable is correctly connected to the server and to
the grounded insulated socket.
Power supply overloaded
Ê Pull the power plug of the server out of the insulated socket.
Ê Wait a few seconds and plug the power plug into the insulated socket again.
Ê Switch on your server.