Filter
Top Products
U41243-J-Z156-1-76 55
Configuration software and utilities BIOS Setup
5.3.4 Advanced Menu
V CAUTION!
Setting incorrect values in this menu may cause your system to
malfunction.
Menu item Option Description
Processor Serial Number Disabled
Enabled
Processor serial number control
Reset Configuration Data No
Yes
Clears system configuration data.
Use Multiprocessor
Specification
1.1
1.4
Specifies the multiprocessor specifi-
cation revision level. Some operating
systems require revision level 1.1. for
compatibility.
Large Disk Access Mode CHS
LBA
Selects the access method for IDE
drives. Most operating systems use
logical block addressing (LBA).
However, some operating systems use
the cylinder head sector (CHS). Refer
to the operating system manual for
further information.
Pause Before Boot Disabled
Enabled
Causes a 5-second pause before the
operating system is booted.
Hot-plug PCI Master
Control
Disabled
Enabled
Set this to “Enable” to create the hot-
plug PCI resource table.
Hot-plug PCI Allocation
Level
Disabled
Minimum
Maximum
Set amount of resources to allocate to
empty hot-plug PCI slots.
Time-out on POST Errors Enabled Operating system boots after 5 sec. of
displaying POST errors.
Disabled Operating system waits for user to
press [F1] or [F2].
Table 11: Advanced options