Filter
Top Products
76 U41243-J-Z156-1-76
Server switches itself off Troubleshooting and tips
7.2 Server switches itself off
Server management has detected an error
Ê In the ServerView program, check the error list or the Error Log file with the
SCU utility and attempt to eliminate the error.
7.3 Screen remains dark
Monitor is switched off
Ê Switch on your monitor.
Screen has been blanked
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness control is set to dark
Ê Set the brightness control to light. For detailed information, please refer to
the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the grounded insulated socket.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, the monitor cable must be connected to the port of this
graphic card.
Ê Switch on the monitor and the server.