Filter
Top Products
U41243-J-Z156-1-76 69
Configuration software and utilities Utilities
5.4.2 BIOS update
5.4.2.1 Preparations
Before you update BIOS, record the current BIOS settings, obtain the utility, and
make a copy of the current BIOS.
Recording the current BIOS settings
Ê Start the server and press [F2] when the following message is displayed on
the screen:
Press <F2> key if you want to run SETUP
Ê Write down the current settings from the BIOS Setup program.
I Do not skip set 2. You will need these settings to configure your
computer at the end of the procedure.
Creating bootable floppy disks
Ê Use a DOS or Windows 95 system to create the floppy disk.
Ê Insert the disk in drive A.
Ê At the C:\ prompt, enter the following for an unformated floppy disk:
format a:/s
or the following for a formated floppy disk:
sys a:
Ê Press Ú.
Ê Copy the flash files generated as described in section “BIOS and firmware
update” on page 70 to your bootable floppy disks.