Filter
Top Products
CHAPTER 5: Troubleshooting your Autoloader www.gateway.com
74
Hard error log display
You can retrieve Hard Error logs through On-board Remote Management. Partial
information about Hard Error logs can be retrieved from the front panel and
SCSI. The front panel and SCSI display only the most important information for
each log.
Whenever the autoloader generates a Hard Error log, the On-board Remote
Management automatically displays the log information. For the other retrieval
methods, you must request the information.
Hard Error logs contain three main fields. By interpreting the information in
these fields, you can determine how to troubleshoot errors.
To retrieve Hard Error log information from the front panel:
1 From the front panel LCD, scroll to Diagnostics, then press ENTER. The
Diagnostics submenu opens.
2 Scroll to Error Logs, then press ENTER. The Error Log submenu opens.
3 Scroll to Hard, then press ENTER. The log information is displayed.
To retrieve Hard Error log information from On-board Remote Management:
1 From any screen, click Diagnostics. The Diagnostics screen opens.
2 Click View Logs.
3 If you want to save logs to your hard drive, click Save Logs. If you save a
log to a file, you must select a destination folder within 60 seconds.
Jammed Tape BF
Jammed Tape DF
Time Zone change E8
By barcode F7
Write Protect FA
Cleaning Tape FB
Load Tape FC
Invalid Tape Format FD
Screen Display Error Code