Filter
Top Products
EX2100 User’s Guide GEH-6632 Appendix B Ratings and Specifications
•
••
•
B-3
Cabinet Dimensions & Weight
Redundant control with dual PCM
redundant converter in a three-cabinet
lineup
Width 141.74 in (3600 mm)
Height 104.32 in (2650 mm)
Depth 31.5 in (800 mm)
Weight of Converter cabinet 3,600 lbs.
Weight of Total Lineup (Converter,
Control, and Auxiliary cabinets)
5,600 lbs.
Cabinet type, control & auxiliary NEMA 1 (IEC IP 20), convection cooled
Cabinet type, power conversion NEMA 1 (IEC IP 20), forced air cooled
Power and Control Cable Access Entrances from the top and/or bottom
Reliability
MTBF - Mean Time Between Failures Simplex system 25,000 hrs
MTBF - Mean Time Between Failures Redundant system 175,000 hrs
MTTR - Mean Time to Repair Any subsystem 4 hrs
Acoustic
Generated Acoustic Noise (Preliminary) PCM cabinet approximately 75 dB
Codes and Standards
UL 508C Safety Standard Industrial Control Equipment
CSA 22.2 No. 14 Industrial Control Equipment
UL 796 Printed Wire Board Assemblies
ANSI IPC Guidelines
IEC 801-2:1991 Electrostatic Discharge Susceptibility
ENV 50140:1993 Radiated RF Immunity
EN 50082-2:1994 Generic Immunity Industrial Environment
IEC 801-4 Electrical Fast Transient Susceptibility
IEC 1000-4-5 Surge Immunity
IEC 1000-4-6 Conducted RF Immunity
ENV 55011:1991 ISM Equipment Emissions
EN 61010-1 Safety of Electrical Equipment, Industrial Machines
IEC 529 Intrusion Protection Codes/NEMA 1/IP 20
IEEE 421.1 Standard Definitions for Excitation Systems for Synchronous machines
IEEE 421.2 Guide for Identification, Testing, and Evaluation of the Dynamic
Performance of Excitation Control Systems
IEEE 421.3 High-Potential Test Requirements for Excitation Systems
IEEE 421.4 Guide for the preparation of Excitation Systems Specs
IEEE 421.5 Recommended Practice for Excitation Systems for Power Stability
Studies
EN50178/LVD/EMC CE Compliance
IEEE C57.12.01 General Requirements for Dry-Type Distribution & Power Transformers
IEEE C57.110 Recommended Practice for Establishing Transformer Capability when
supplying Non-Sinusoidal Load Currents
IEEE C57.116 IEEE Guide for Transformers Directly Connected to Generators
IEEE C37.90.1 Surge Withstand Capability (SWC) tests for Protective Relays and Relay
Systems
IEEE C57.18.10 Practices and Requirements for Semiconductor Power Rectifier
Transformers