Filter
Top Products
hp psc 2400 series
chapter 13
130
fax setup
how to answer fax calls manually
You must be available to respond in person to incoming fax calls, or your HP PSC
cannot receive faxes. For information on how to receive fax calls manually from
your attached phone and from an extension phone, see receive a fax manually
on page 61.
faxing from a DSL line
If you have a digital subscriber line (DSL) service through your phone company,
use the instructions in this section to connect a DSL filter between the telephone
wall jack and your HP PSC. This filter removes the digital signal that would block
your HP PSC from communicating properly with the telephone line.
Caution! If you have a DSL line and you do not connect the DSL
filter, you will not be able to send and receive faxes with your
HP PSC.
1 First, connect your HP PSC according to the appropriate setup case for
your office. For information, see how to choose the right fax setup for your
office on page 116.
2 Obtain a DSL filter from your DSL provider.
3 Using the phone cord supplied in the box with your HP PSC, connect one
end to the open port on the DSL filter, then connect the other end to the
port labeled “1-LINE” on the back of your HP PSC.
Note: While connecting your setup case, you might have already
connected your HP PSC to the telephone wall jack using the HP-supplied
cord. If so, remove this cord from the wall jack and connect it to the open
port on the DSL filter.
Caution! If you do not use the supplied cord to connect from the
DSL filter to your HP PSC, you might not be able to fax
successfully. This special 2-wire cord is different from the more
common 4-wire phone cords you might already have in your
office. For more information about how to tell the difference
between the cords, see I have difficulties when sending faxes and
when receiving faxes on page 145.
4 Connect the DSL filter cord to the telephone wall jack.
Te
l
ep
h
one
wall jack
Back view of the HP PSC
Use the phone cord
supplied in the box with
your HP PSC
DSL filter supplied
by your DSL
provider