Filter
Top Products
hp psc 2400 series
chapter 2
16
load originals & paper
3 Slide the paper-length and paper-width guides inward against the stack of
cards until they stop.
Make sure the cards fit within the tray (do not overload it). The stack
should be no higher than the top of the paper-width guide.
4 Replace the output tray.
recommended papers
If you want the best print quality, HP recommends HP papers. Using paper that
is too thin, paper that has a slick texture, or paper that stretches easily can cause
paper jams. Using paper that has a heavy texture or does not accept ink can
cause printed images to smear, bleed, or not fill in completely. For more
information about HP Premium Inkjet papers, go to the HP website:
www.hp.com/support
load other types of paper in the input tray
The following table provides guidelines for loading certain types of paper and
transparency film. For best results, adjust the paper settings each time you
change paper sizes. For more information, see set the paper size on page 18.
paper tips
HP papers
• HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then insert paper with the arrow side facing up.
• HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top
and is going into the input tray first.
• HP Iron-On Transfer: Flatten the transfer sheet completely before
using it; do not load curled sheets. (To prevent curling, keep
transfer sheets sealed in the original package until you are ready
to use them.) Manually feed one sheet at a time, with the
unprinted side facing down (the blue stripe faces up).
• HP Matte Greeting Cards, HP Glossy Greeting Cards, or
HP Textured Greeting Cards: Insert a small stack of HP greeting-
card paper, with the print side down, into the input tray until it
stops.