Filter
Top Products
hp psc 2400 series
chapter 6
60
fax
3 Press until the number of rings before answering is highlighted.
If you have an answering machine on this phone line, set your HP PSC to
answer the phone after the answering machine. The number of rings to
answer for the HP PSC should be greater than the number of rings to
answer for the answering machine.
You want the answering machine to answer before your HP PSC. The
HP PSC monitors calls and will answer if it detects fax tones.
4 Press OK to accept the setting.
5 If you have a modem on this phone line, turn off the setting in the modem’s
software that automatically receives faxes to your computer; otherwise,
your HP PSC will not receive faxes properly.
For information on setting up your HP PSC with other office equipment, such as
answering machines and voice mail, see fax setup on page 115.
set up your hp psc to answer fax calls manually
In certain situations, you might want to receive faxes manually. For example, if
you share a line between your HP PSC and phone and you do not have
distinctive ringing, you will need to set up the HP PSC to answer fax calls
manually. This is because the HP PSC will not be able to distinguish between
fax calls and phone calls. When receiving faxes manually, you must be
available to respond in person to the incoming fax call, or your HP PSC cannot
receive faxes. For more information on receiving faxes manually, see receive a
fax manually on page 61.
For information on setting up your HP PSC with other office equipment, such as
answering machines and voice mail, see fax setup on page 115.
1 Press Setup.
2 Press 3, then press 3 again.
This selects Basic Fax Setup and then selects Rings to Answer.
3 Press 2.
This selects No Answer.
4 Press OK to accept the setting.
Basic Fax Setup
1. Date and Time
2. Fax Header
3. Rings to Answer
4. Paper Size
5. Tone or Pulse Dialing
6. Ring and Beep Volume
Rings to Answer
1. 6 rings
2. No Answer
3. 1 ring
4. 2 rings
5. 3 rings
6. 4 rings
7. 5 ri ng s