Filter
Top Products
reference guide
use the copy features
41
copy
copy a 4 by 6 inch (10 by 15 cm) photo onto a full-size page
In addition to making actual size copies of an original, the Borderless feature
can automatically enlarge or reduce your original to fill the paper loaded in the
input tray. In this example, Borderless is used to enlarge a 4 by 6 inch (10 by
15 cm) photo to create a full-size borderless copy.
Note: In order to achieve a borderless print without changing the
proportions of the original, the HP PSC might crop some of the image
around the margins. In most cases, this cropping will not be noticeable.
1 Make sure that the glass and lid backing are clean.
2 Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the
front edge of the glass.
Tip: When copying a photo, you might want to use the photo
print cartridge for superior print quality. With the tri-color and
photo print cartridges installed, you have a six-ink system. See use
a photo print cartridge on page 85 for more information.
3 Load letter or A4 photo paper in the input tray.
4 Press Copy twice, and then press 1.
This displays the Copy Menu and then selects Borderless.
5 Press to highlight On, and then press OK.
The Reduce/Enlarge menu becomes disabled so that you cannot access it.
Copy Menu
1. Borderless
2. Reduce/Enlarge
3. Copy Quality
4. Paper Size
5. Paper Type
6. Lighter/Darker
7. Enhancements
8. Color Intensity
9. Set New Defaults
Borderless
1. Off
2. On