Filter
Top Products
reference guide
hp instant share setup and use
133
hp instant share
use the hp instant share photo menu option
For information on using a photo memory card, see use a photo memory card
on page 21.
1 Select an photo from your photo memory card.
2 From the front panel, press Photo, and then press 9.
The HP Instant Share tab within the HP Gallery displays on your PC.
Your HP PSC transfers the selected photo to the HP Gallery. The path and
filename of the digital image are shown in the Selection Tray at the bottom
of the window.
Note: Make sure the photo you select appears on the color graphics
display. The photo that appears on the display is sent to the HP Gallery,
even if it is different from the one that you selected.
3 In the Control area, click Start HP Instant Share.
The Go Online screen appears in the Work area.
4 To use HP Instant Share, go to step 6 in access hp instant share from the
hp director below.
use a scanned image
For information on scanning an image, see use the scan features on page 51.
1 Load your original face down in the right front corner of the glass.
2 Press Scan.
A preview image of the scan appears in the HP Scan window on the
computer, where you can edit it.
For more information about editing a preview image, see the onscreen
hp photo & imaging help that came with your software.
3 Make any needed edits to the preview image in the HP Scan window.
When you have finished, click Accept.
The HP PSC sends the scan to the HP Gallery, which automatically opens
and displays the image.
4 After you have edited the scanned image, select it.
Note: The HP Gallery has many editing tools that you can use to edit your
image and achieve the results you want. For more information, see the
onscreen hp photo & imaging help that came with your software.
5 Click the HP Instant Share tab.
6 In the Control area, click Start HP Instant Share.
The Go Online screen appears in the Work area.
7 To use HP Instant Share, go to step 6 in access hp instant share from the
hp director below.