Filter
Top Products
Troubleshooting
Solving Problems
Reference Guide 111
In Windows 95 or Windows 98, view the CD-ROM drive properties in Device
Manager.
If retail Windows NT 4.0 is installed, you must edit the Registry to change this
setting:
CAUTION: Incorrect editing of the Registry can make the system unbootable.
1. Log in as administrator.
2. Click Start, Run, type REGEDIT, and click OK.
3. Select HKEY_LOCAL_Machine\System\CurrentControlSet\Services\Cdrom.
4. Double-click AutoRun, change the value from 1 to 0, and click OK.
5. Exit the Registry Editor, then shut down and restart Windows.
If the OmniBook doesn’t automatically hibernate as expected
• For Windows NT, certain point-enabled PC Cards and possibly other cards may
prevent automatic hibernation when battery power is low. This may cause a drained
battery and data loss. When leaving the computer unattended, either connect the ac
adapter or shut down the computer.
• For Windows 2000, check to see that hibernate support is enabled. From Control
Panel, open Power Options, and then click the Hibernate tab.
Also, check the Power Schemes tab. Make sure the Hibernate time-outs for both ac
power and battery power are not set to Never.
Printing Problems
Hint
For most printing problems, click Start, Help and use the Print Troubleshooter. If you’re
using Windows 2000, click Start, Help, Troubleshooting, and Print.
If a serial or parallel printer doesn’t print
• Check that you are using a proper cable or cable adapter, and that the printer is turned
on.
• Check for paper in the printer or other printer errors.
• Make sure the printer cable is secure at both ends.
If an infrared printer doesn’t print
• Windows NT 4.0 does not support infrared devices.