Filter
Top Products
Service Tests and Utilities
3-42 HP Designjet T Series — Service Manual
14 The Front Panel prompts you to shutdown the printer to complete the test.
15 Press any key to shutdown the printer.
8. Service Station
The complete Service Station test consists of individual tests for the different
components related to this subsystem.
These tests are:
Service Station
Primer Motor
Aerosol Fan
Diagnostic tests also need to be performed after removing or replacing
certain pr
inter components. If you have removed or replaced printer
components, check the
Service Calibration Guide to Removal and
Installation on page 6-5 to see which tests and calibrations you need to
perform.
Service Station
1 In
the Diagnostics menu, scroll to 8. Serv
ice Station and press OK.
2 The Front Panel will show the 8. Service Station submenu.
3 In the 8. Service Station submenu, scroll to Service Station and press
OK to start the test.
4 The Service Station test starts and the front Panel displays the following
mes
sages:
Starting Horsburgh and Mips
Starting Nvm
Booting up Carriage.