Filter
Top Products
Service Tests and Utilities
3-64 HP Designjet T Series — Service Manual
Select Reset usage counters t
o reset the Life Counter of a single part.
a If you select Reset Maintenance usage, which will reset the Life Counter
for ALL parts included in a Preventive Maintenance Kit (PMK), you can
choose from the following Preventive Maintenance Kits:
Preventive Maintenance Kit 1 (PMK1). See Preventive Maintenance Kit #1
on page 7-5.
Preventive Maintenance Kit 2 (PMK2). See Preventive Maintenance Kit #2
on page 7-6.
Preventive Maintenance Kit 3 (PMK3). See Preventive Maintenance Kit #3
on page 7-6.
For more information about the counters that are reset, See
Chapter 7
Preventive Maintenance on page 7-1.
It is also advisable to check the status of the Life Counters
related to the other Preventive Maintenance Kits to avoid
multiple trips to the customer.
b If you select to Reset usage counters, which will reset the Life Counter of a
single part, you can choose from the following parts:
Tubes and Trailing Cable
Scan-Axis Belt
Scan Motor
Left Spittoon
Right Spittoon
Full Bleed Foams
Aerosol Fans
Carriage
Service Station
3 Once you have selected a Life Counter to reset, the following message will
be dis
played on the Front Panel. Press the OK key to reset the selected Life
Counter or press Back/Cancel to exit without resetting the Life Counter.