Filter
Top Products
HP Designjet T Series — Service Manual 6-220
Removal and Installation - Media Advance Drive
Installation
1. Carefully position the Media Advance
Drive in the printer.
2. These parts should be loose during
disassembly. They will be tightened in the
following steps.
Follow these instructions
exactly. If you do not follow
these instructions, the printer
may not function properly.
When you finish installing or replacing this component, you must perform the
necessary Service Calibrations. To find which calibrations you must perform,
see Service Calibration Guide to Removal and Installation
on page 6-5.
Use the following procedure to install and correctly adjust a new Media
Advance Drive. You will need Media Advance Drive Adjustment Tool from the
Tool KIt (Q6683-67001).
If you are installing the Encoder Sensor after replacing the Media Advance
Drive with a new unit, you will need to adjust the Encoder Sensor position on
the Media Advance Drive.