HP Designjet T Series — Service Manual 6-173
Removal and Installation - Carriage PCA (T1100/T1100ps/T610)
Carriage PCA (T1100/T1100ps/T610)
Removal
1. Remove the Right Cover on page 6-27.
2. Remove the
Left Cover on page 6-30.
3. Remove the
Front Panel on page 6-47
4. Remove the Top Cover on page 6-50.
5. Remove the
Window Position Sensor on
page 6-53.
6. Remove the
Ink Supply Tubes Support Rail
(T1100/T1100ps/T610) on page 6-55.
7. Open the Carriage Cover.
8. Remove all the Printheads.
Switch off the printer and remove the power cable.