HP Designjet T Series — Service Manual 6-83
Removal and Installation - Right Spindle Holder and Rewinder (T1100/T1100ps/T610)
Right Spindle Holder and Rewinder (T1100/T1100ps/T610)
The Rewinder is only applicable to the 44 inch printers.
For the 24 inch models, see
Right Spindle Holder (24” ONLY) on page 6-81.
Removal
1. Remove the Spindle on page 6-79.
2. Remove the
Right Cover on page 6-27
3. Remove the grounding cable attachment
screw from the PrintMech PCA.
4. Disconnect the Rewinder and encoder
cables from the PrintMech PCA.
Switch off the printer and remove the power cable.
44 inch T1100 printer shown (with Rewinder)
44 inch T1100 printer shown (with Rewinder)