Filter
Top Products
System Error Codes
2-4 HP Designjet T Series — Service Manual
Continuable and Non-Continuable Error Codes
Some of the Error Codes are continuable, which means you can press OK
on the front-panel and continue working with the Printer. Non-Continuable
Error Codes do not allow you to continue working with the Printer, in this
case power the Printer OFF and ON again and see if the System Error
disappears. If the Error Code reappears, then the Printer requires an on-site
visit in order to resolve the problem.
Even though the customer can continue working with a
Continuable Error Code, an on-site visit should still be
planned to troubleshoot the problem.
System Error Code Brief Descriptions
Reading a System Error Code
System Error Codes explain which component/system is failing and what
action should be taken to resolve the problem.
System Error Codes are displayed directly on the front panel (but can also
be seen on
the Information Page) and have been defined in the format
XX.YZ. or XX.n:YZ.m.
XX: Can be a malfunctioning subsystem or process (2 digits).
n: Subsystem or process Index (if more than one used in the product) -
Optional.
– e.g. Identify the Ink Supply (color and number).
Y: Who should perform the action (1 digit) - (0 for User or1 for Service
Engineer).
Z: Action to perform (1 digit).
System Error Code Table
The following table explains the XX part of the System Error Code or
Warning:
Code Component/System
01.0 Main PCA/Electronics module
01.1 Add-on Electronics module (printmech)
01.2 Print Mech PCA
02.1 Carriage PCA
03 Power supply
06 Formatter
08 Formatter/Front panel
11 Trailing cable
21 Service station