Filter
Top Products
HP Designjet T Series — Service Manual 1-41
Ink Supplies Troubleshooting
Available Printheads
Printhead Type Printer Model Part
number
HP 72 Gray & Photo Black
Prin
thead
All
C9380A
HP 72 Magenta & Cyan Printhead C9383A
HP 72 Matte Black & Yellow
Prin
thead
C9384A
General Information About the Ink Supplies
For optimum results from the printer and modular ink delivery system always
fol
low these guidelines when handling the ink supplies:
Always install the Ink Cartridges and Printheads before the expiration
date, which is on the packaging.
Install Ink Cartridges and Printheads in their color-coded slots.
Follow the instructions on the front panel of the Printer during installation.
Avoid unnecessary removal of the Ink Cartridges and Printheads.
When turning off the Printer always use the power Off button on the front
panel. The Printheads are then stored correctly which prevents them from
drying out.
The Ink Cartridges should never be removed while the printer is printing.
They should only be removed when the printer is ready for you to replace
them. The front panel will guide you through the removal and installation
procedure.
General Precautions When Handling Ink Supplies
Do not touch, wipe or attempt to clean the printhead
nozzles. This can damage the printhead.
Use the following precautions when handling Ink Supplies:
Handle the ink supplies with care. In particular the Printhead, which is a
high precision device and must be handled carefully.
Do not touch the Printhead nozzles.
Do not put the Printhead down on the nozzles.
Do not be rough when handling the Printheads. Always set them down
gently.
Do not drop the Printheads.
Proper handling will assure optimum performance throughout the
Printhead life.
Do not touch the end of the Ink Cartridge which is inserted into the printer
as there may be a small amount of ink on the connection.
Avoid storing partially used Ink Cartridges on their ends.